Inertia separators are high‑efficiency filter housings that deliver exceptional performance on coarse particles. Inertia filters operate on the principle of inertia, built from engineered vanes that eliminate heavy contaminated air streams from clean air at high velocity while the heavier particles continue past the blades and into the dust bin. A separation efficiency of up to 99% on 5‑micron particles may be achieved. Thanks to the inertia of large particles, they are forced to move out of the system and clean air is only allowed to pass through. Inertia‑Cell™ systems may be supplied with fans, dual fans, and equipped with several optional accessories.

Glass fiber media pads made from non viscous, progressive density, lofted glass fibre finished with a special adhesive coating for enhanced filtration performance, developed for heavy duty industrial use, and considered a superior choice for residential and commercial installations.

GaShield CYL™ is a cylindrical gas‑filter housing built for canister‑type molecular cartridges. Customizable for any gas or application, it offers durable powder‑coated construction, gasket‑sealed doors, and cross‑locked framing to eliminate air bypass. Available in a wide range of configurations and accessories.

PTFE (polytetrafluoroethylene) filter bags offer exceptional chemical resistance, high‑temperature resistance, excellent dust cake release properties, and low friction characteristics. They are commonly used in industries where demanding operating conditions and corrosive environments are present.

A portable, self‑powered barrier purifier designed for use during patient inspection or treatment in high‑risk clinical areas. Virushield™ draws air directly from the patient zone, pulling it through a high‑efficiency HEPA filtration stage and an internal UV‑disinfection chamber to reduce airborne pathogen transfer. Its low‑noise, uniform‑airflow system creates a safer working space for medical staff and nearby occupants. Built from stainless steel and engineered for continuous operation in emergency and infectious‑disease environments.

A self‑powered, low‑profile gas‑phase fan filter unit engineered for molecular filtration using advanced adsorbent media. This model features a side‑inlet design for horizontal airflow. Its low‑vibration, low‑noise design ensures uniform airflow across activated carbon or chemisorptive beds, delivering effective removal of odors and gaseous contaminants. Built in stainless steel and compatible with remote control and networked operation for critical environments.

Configurable four‑stage air filter housings, customized to any air flow volume and may be equipped with a vast range of air filters and optional accessories. Designed for simplified maintenance, constructed from sturdy metals, dynamically built to fine tolerances for a perfect fit, the units are individually leak and pressure tested, and incorporate latching hinges. Doors can swing right, left, or be removed to improve accessibility, featuring single or dual access doors for each section, and may be equipped with a vast range of optional accessories.

Heavy‑duty G3/G4 grade pre‑filters engineered for demanding gas turbine environments. Built for high mechanical strength and resistance to moisture, mists, and fluctuating operating conditions. Their densified structure delivers superior dust‑loading capability and durability, supporting stable turbine performance and reduced maintenance.

Built to serve two distinctive purposes, particulate and odor filtration in one simple yet effective solution, GAFCO® Graphyte PLUS™ filters are constructed from a combination of triboelectric filter media laminated to patent activated carbon loaded fleece, the media is resin adhesive free leaving activated carbon surface area open for increased adsorption, the result is superior particulate filtration in addition to high levels of odor filtration.

Thread backed lofted glass fibre media pads offer maximum support for heavy duty industrial applications, made from non viscous, progressive density, high loft glass fibre, media is supplied in dry form or finished with a special adhesive coating for enhanced filtration performance.

The fiberglass woven fabric with PTFE membrane filter bag is a high‑performance filter media designed for industrial dust collection and filtration applications. It combines the strength and durability of fiberglass with the enhanced filtration efficiency provided by a PTFE membrane.

Designed to serve in extreme operating conditions, Stiph GT™ series filters are suitable for high‑demanding applications, such as outdoor electronic enclosures and outdoor cooling cabinets; they have been installed by leading telecom OEMs. Features a stiff, tear‑resistant, pleatable, PET spunbond‑backed synthetic membrane. The filters perform in high‑temperature, salty, dry, and moist environments offering thorough protection to expensive equipment and systems.

Heavy duty net reinforced synthetic media pads for use in spray booths, overspray collection systems, and drying cabinets. The medium is treated with a special adhesive to help prevent dust loss due to vibration, and the net backing offers maximum support and maintains the uniform fiber construction providing excellent pre-filtration performance.

Built to remove a very wide range of airborne chemicals in the traditional pocket bag filter design. A simple yet effective solution, GAFCO® Graphyte™ filters are constructed from patent activated carbon loaded fleece, the media is resin adhesive free leaving activated carbon surface area open for increased adsorption resulting in superb odor filtration performance.

The PPS (polyphenylene sulfide) filter bag is a high‑quality filtration solution designed for baghouse filter systems. Made from PPS fibers, this filter bag offers excellent filtration efficiency and chemical resistance.

Built to withstand the harshest environments in desert and urban gas turbine and diesel/gas engine installations. True‑LOFT™ extended surface multi‑pocket (bag) filters are made of progressive‑density high loft tear‑resistant 100% polyester fibers featuring two distinctive properties: high functional reliability throughout its service life as well as high dust‑holding capacity 3 times the filter’s weight.

Polyamide (P84) filter bags are a type of high‑performance filter media widely used in industrial applications for dust collection and filtration. They are made from polyamide fibers, which offer excellent chemical resistance, high‑temperature resistance, and exceptional filtration efficiency.

Heavy duty primary aluminum media rolls composed of progressive density, expanded aluminum mesh laid in layers and held in a cross pattern to form an attracting net, built for first stage filtration of large particle, moisture, water and grease separation, the medium is rust resistant and washable.

Constructed from patent activated carbon loaded fleece, Activ‑CELL™ filters are resin adhesive free leaving activated carbon surface area open for increased adsorption, the media contains no reagent to react prematurely with impregnate in the carbon. Superior micro structure helps increase filter efficiency and prolong filter service life by maximizing carbon granule’s exposure.

Synthetic media rolls are available in a wide range of thicknesses, classess, and compositions to suite a variety of applications such as self service panel filters, pre-filters in commercial HVAC systems, unitary equipment’s, unit ventilators, fan coil units, and packaged terminal air conditioners.

Acrylic filter bags are made from acrylic fibers, which offer a combination of good chemical resistance, high strength, and moderate temperature resistance. Acrylic filter bags are known for their efficient filtration performance and durability in various industrial environments.