Autoklean™ systems are long‑term cost‑effective pre‑filtration solutions featuring a compact design with an exceptionally large surface area for mass filtration. A programmed pressure gauge continuously calculates differential pressure and, through an electrical circuit, triggers the system to automatically unwind the roll, exposing new clean filter media from the top cassette while the bottom cassette takes up the used contaminated media via an automated differential pressure control system.

Heavy duty primary aluminum media pads composed of progressive density, expanded aluminum mesh laid in layers and held in a cross pattern to form an attracting net, built for first stage filtration of large particle, moisture, water and grease separation, the medium is rust resistant and washable.

A self‑powered, low‑profile, semi‑silent, low‑vibration fan filter unit (FFU) provides a uniform clean stream of HEPA/ULPA micro‑filtered air. Ventex FFU’s™ are made of stainless steel and supplied with pre‑filters, a 3‑speed controller, and may be chain‑linked and remotely controlled to meet cleanliness standards down to Class 1 per ISO14644‑1 standards.

A portable, self‑powered gas‑phase air purifier designed for effective odor and general gas removal using advanced adsorbent media. Its low‑noise, uniform‑airflow system drives air through activated carbon or chemisorptive cartridges to neutralize a wide range of contaminants. Built in stainless steel and available with optional particulate filtration for improved indoor air purification.

Configurable two‑stage air filter housings, customized to any air flow volume and may be equipped with a vast range of air filters and optional accessories. Designed for simplified maintenance, constructed from sturdy metals, dynamically built to fine tolerances for a perfect fit, the units are individually leak and pressure tested, and incorporate latching hinges. Doors can swing right, left, or be removed to improve accessibility, featuring single or dual access doors for each section, and may be equipped with a vast range of optional accessories.

Pro‑TECHT™ is a customizable single‑stage built‑up filter bank designed for any air‑intake dimension to protect downstream equipment. Constructed from galvanized steel or extruded aluminum profiles, it features an easy‑lock mechanism and supports a wide range of pre‑filters and medium‑efficiency filters.

Synthetic media pads are available in a wide range of thicknesses, classes, and compositions to suite a variety of applications such as self service panel filters, pre-filters in commercial HVAC systems, unitary equipment’s, unit ventilators, fan coil units, and packaged terminal air conditioners.

GaShield TRY™ is a tray‑type molecular filter housing that can be customized for any application. It supports multiple tray depths, finishes, and accessories, and can be customized to target any specific gas or contaminant load. Its compact, robust design ensures reliable operation and precise filtration performance.

Autoklean™ systems are long‑term cost‑effective pre‑filtration solutions featuring a compact design with an exceptionally large surface area for mass filtration. A programmed pressure gauge continuously calculates differential pressure and, through an electrical circuit, triggers the system to automatically unwind the roll, exposing new clean filter media from the top cassette while the bottom cassette takes up the used contaminated media via an automated differential pressure control system.

A portable, self‑powered, semi‑silent air purifier designed to convert standard neutral patient rooms to negative pressure rooms by collecting excess air and purifying it before it is transferred to other zones within the facility. Designed to serve two purposes — a negative pressure builder or a standalone air purifier for any zone — through its built‑in HEPA or ULPA filter. Ventex™ PFFU’s are made of stainless steel casings and may be equipped with a number of standard and optional accessories. The controller features a filter life span indicator, an indoor air quality indicator, a UV light on/off switch, and up to 9 speeds with a turbo mode function for fast cleaning cycles.

A self‑powered, low‑profile gas‑phase fan filter unit engineered for molecular filtration using advanced adsorbent media. This model features a top‑inlet design for vertical airflow. Its low‑vibration, low‑noise design ensures uniform airflow across activated carbon or chemisorptive beds, delivering effective removal of odors and gaseous contaminants. Built in stainless steel and compatible with remote control and networked operation for critical environments.

Configurable three‑stage air filter housings, customized to any air flow volume and may be equipped with a vast range of air filters and optional accessories. Designed for simplified maintenance, constructed from sturdy metals, dynamically built to fine tolerances for a perfect fit, the units are individually leak and pressure tested, and incorporate latching hinges. Doors can swing right, left, or be removed to improve accessibility, featuring single or dual access doors for each section, and may be equipped with a vast range of optional accessories.

Pro‑TECHT PLUS™ is a customizable two‑stage built‑up filter bank designed for any air‑intake dimension requiring enhanced protection. Constructed from galvanized steel or extruded aluminum profiles, it features an easy‑lock mechanism and supports a wide range of pre‑filters and secondary medium‑efficiency filters for higher particulate control.

Inertia separators are high‑efficiency filter housings that deliver exceptional performance on coarse particles. Inertia filters operate on the principle of inertia, built from engineered vanes that eliminate heavy contaminated air streams from clean air at high velocity while the heavier particles continue past the blades and into the dust bin. A separation efficiency of up to 99% on 5‑micron particles may be achieved. Thanks to the inertia of large particles, they are forced to move out of the system and clean air is only allowed to pass through. Inertia‑Cell™ systems may be supplied with fans, dual fans, and equipped with several optional accessories.

Glass fiber media pads made from non viscous, progressive density, lofted glass fibre finished with a special adhesive coating for enhanced filtration performance, developed for heavy duty industrial use, and considered a superior choice for residential and commercial installations.

GaShield CYL™ is a cylindrical gas‑filter housing built for canister‑type molecular cartridges. Customizable for any gas or application, it offers durable powder‑coated construction, gasket‑sealed doors, and cross‑locked framing to eliminate air bypass. Available in a wide range of configurations and accessories.

A portable, self‑powered barrier purifier designed for use during patient inspection or treatment in high‑risk clinical areas. Virushield™ draws air directly from the patient zone, pulling it through a high‑efficiency HEPA filtration stage and an internal UV‑disinfection chamber to reduce airborne pathogen transfer. Its low‑noise, uniform‑airflow system creates a safer working space for medical staff and nearby occupants. Built from stainless steel and engineered for continuous operation in emergency and infectious‑disease environments.

A self‑powered, low‑profile gas‑phase fan filter unit engineered for molecular filtration using advanced adsorbent media. This model features a side‑inlet design for horizontal airflow. Its low‑vibration, low‑noise design ensures uniform airflow across activated carbon or chemisorptive beds, delivering effective removal of odors and gaseous contaminants. Built in stainless steel and compatible with remote control and networked operation for critical environments.

Configurable four‑stage air filter housings, customized to any air flow volume and may be equipped with a vast range of air filters and optional accessories. Designed for simplified maintenance, constructed from sturdy metals, dynamically built to fine tolerances for a perfect fit, the units are individually leak and pressure tested, and incorporate latching hinges. Doors can swing right, left, or be removed to improve accessibility, featuring single or dual access doors for each section, and may be equipped with a vast range of optional accessories.

Thread backed lofted glass fibre media pads offer maximum support for heavy duty industrial applications, made from non viscous, progressive density, high loft glass fibre, media is supplied in dry form or finished with a special adhesive coating for enhanced filtration performance.

Heavy duty net reinforced synthetic media pads for use in spray booths, overspray collection systems, and drying cabinets. The medium is treated with a special adhesive to help prevent dust loss due to vibration, and the net backing offers maximum support and maintains the uniform fiber construction providing excellent pre-filtration performance.